No matter what your HVAC questions are, the pros at All Solutions Heating & Cooling in Beaverton have answers. Whether you have questions about choosing new HVAC equipment to best practices on care and maintenance, we can help. Our online FAQs answers offer a rapid response for your convenience, but if you want to know more on any topic, don’t hesitate to give us a call at 971-414-2639.

Just like you need to take your car in to the shop for routine tune-ups, such as oil changes or inspecting probable concerns, your home comfort system should get the same kind of attention. Scheduled maintenance by a skilled technician provides a variety of benefits to your HVAC equipment, which can help your systems operate efficiently and prevent costly breakdowns.
The cost can fluctuate depending on the equipment size and different features, so we recommend contacting All Solutions Heating & Cooling at 971-414-2639 to get a quote.
Two-stage heating permits the furnace to heat at two levels of output: high for cold winter days and low for mild ones. Approximately 80 percent of the time, your homes heating requirements can be met when the furnace is kept on the low setting, enabling your two-stage unit to operate for longer periods of time. Two-stage units also provide more even heat distribution, fewer temperature swings, quiet operation, increased air filtration and energy efficiency.
All Solutions Heating & Cooling has a variety of brands and models that are more efficient than ever and make it easier to find the best match for your home. There are innovative systems that make heating or cooling your home more automatic, operating similar to cruise control to make tiny adjustments to help meet your comfort demands with energy efficiency. You can reach us at 971-414-2639 to learn more about the technology we offer.
Depending on how old your previous furnace was, you could experience a number of differences. Furnaces today are developed to offer more even and efficient heating than ever before. Modern furnaces also better regulate temperature and air flow, moving more air over the heat exchanger than older furnaces.

Additionally, new furnaces are designed to operate with other high-efficiency HVAC products, such as air conditioners. The air conditioner blowers give your heating system an extra boost so it can deliver cool air around your home efficiently. Special features like variable speed motors will also help reduce noise associated with operating your equipment and easily meet your family’s airflow needs.

The Department of Energy recently boosted the minimum efficiency levels for air conditioners, heat pumps and packaged units manufactured after Jan. 1, 2015, since heating and cooling contributes significantly to a homes total energy usage. The requirements vary by region, so call All Solutions Heating & Cooling for the efficiency standards for Beaverton.
All Solutions Heating & Cooling offers a number of HVAC products with high-efficiency ratings, which can help lower the amount of energy they require to work. Aside from picking products that have received Energy Star® certification or achieved high SEER ratings for air conditioners or AFUE ratings for furnaces, you can consider the following:

  • Making certain that your system receives routine maintenance by a trained expert can keep your system operating at its top performance.
  • Zoning systems enable you to heat or cool only specific areas of your home, so you wont have to pay to heat or cool spaces that aren’t used.
  • Installing a programmable thermostat allows you to set the temperature in your home around your schedule. They can be programmed to give you the comfort you desire when you’re home and increase or decrease the temperature while you’re not around, helping you save on heating and cooling costs.
All Solutions Heating & Cooling is well-known in the Beaverton area and you can depend on them to provide quality home comfort products. We carry a variety of innovative and high-quality products. We are dedicated to giving customers high-quality service and will make sure you find the appropriate solution for your home.
Improving your home’s indoor air quality starts with four basic strategies:

    • Poor indoor air quality leaves your home with lots of air pollutants floating around. So, to increase IAQ, the first step is to get rid of as many pollutants as possible. You can easily do this by cleaning and vacuuming at least weekly, frequently washing linens and storing cleaning products safely.
    • Proper insulation is ideal for keeping your home warm in the winter and cool in the summer, but it also makes it difficult for airborne pollutants to escape. We carry products that help swap stale air for fresh, filtered outside air.
    • Good ventilation and routine cleaning are a start, but air filters, germicidal lights and purification systems take your IAQ to the next level by capturing microscopic particles, killing germs and eliminating particles while destroying chemical vapors.
    • Programmable thermostats will help control the humidity levels and temperature to help stop particles and germs from building up while also keeping your home comfortable.

We recommend that you meet with one of the experts at All Solutions Heating & Cooling and have them assess your home and current indoor comfort system. We can help you choose which equipment will be best suited to meet your needs.

Many homeowners believe that air conditioners make your home cooler, but it actually removes the heat from inside your home, moving the hot air outside. That hot air flows across a cold indoor coil where refrigerant in the lines sends the heat to the coil in your outdoor unit, releasing the hot air outside. This process continues until the indoor temperature reaches the desired level that you set on your thermostat.
Due to the high amount of energy used by heating and cooling systems, the Department of Energy (DOE) increased the minimum efficiency levels for air conditioners, heat pumps and packaged units manufactured after January 1, 2015. These levels are determined based on region and carry varying requirements based on your location. All Solutions Heating & Cooling can answer any questions you may have regarding these minimum requirements and let you know what choices are available when you’re looking for a replacement system.
You can find these numbers on a nameplate or sticker that is near your systems service panel. The sticker will be white with black letters and have both of these numbers located at the top of the sticker. M/N signifies model number while S/N is your serial number.
There are a handful of ways to determine what size system is the best fit for your home, but the most reliable way to determine the right size system is by having your local All Solutions Heating & Cooling technician come out and perform a load calculation. This calculation considers your homes: square footage, insulation value, amount of insulation, and a number of other factors.
The short answer is Yes, because dirt and other debris can inhibit your systems ability to work efficiently. For heat pumps, it is not unusual to have frost or ice on them during the winter, but they also include defrost controls to ensure they work efficiently in that type of weather.
Two-stage cooling means that your cooling unit has two levels of operation. When summer is in its hottest weeks, the high setting is used, and when its cooler or more mild, the low setting gets the job done. Most of the time, the lower setting can take care of your cooling needs, but even when the high setting kicks in, you may not realize it because it can generate such even temperatures for your comfort. This can also mean a quieter cooling system, greater efficiency and enhanced humidity control.
When your cooling unit freezes up, there are a variety of reasons why it could be doing so. The most common reasons include: dirty filters, low refrigerant, a dirty evaporative coil and a faulty blower motor or relay. A dirty filter is something you can take care of as a homeowner, but the others need to be done by a professional like those at All Solutions Heating & Cooling. Contact them at 971-414-2639 with any other questions.
Choosing the best thermostat for your cooling system comes with a lot of considerations. Thats why its nice to have such a great variety of choices from All Solutions Heating & Cooling. Whether you’re in the market for for a programmable or non-programmable thermostat or want to join the smart home trend, there are a variety of thermostats that you have to choose from. Some thermostats will depend on what type of heating and cooling system you have, but the experts at All Solutions Heating & Cooling will be able to help determine what options are best for your needs and your budget.
Heat pumps can be a bit confusing due to their name, but they actually take care of both your heating and cooling needs year-round. When its hot outside it runs like an air conditioner in that it removes heat from your home, but when it cools off, the process gets switched around and it collects heat from outside and brings it inside. Heat pumps are also very efficient, and might produce up to two or three times more heat than the energy it uses.

Of course we advise you to also replace your indoor system, but this is why:

      • All outdoor cooling systems have a matching indoor unit that they are created to work with to ensure efficient performance. When they aren’t paired with the other piece as a whole system, efficiency might be affected.
      • As with a lot of products, advancements have brought about newer, more efficient ways of doing things. Heating and cooling systems are no different. These developments most importantly include better heating and cooling efficiency, but also include improved air handling, filtering and noise pollution reduction to name a few.
      • Heating and cooling systems that are more than 10-15 years old typically need to be replaced. Not only do they feature outdated technology, but they are also less efficient than more recent models. Adding a new indoor unit at the same time means you’ll have a matched system to provide you with improved comfort and efficiency for years to come.
The communication module on your home energy system might send the system’s performance records for each module to a website. You should visit this website to learn more about the system’s status, energy production and environmental benefits. The site also shows carbon offsets as it happens.
In most locations, rain will naturally clean the solar modules. If you live in a dusty or industrial area, periodically spraying the modules with water can help improve performance. However, detergents and high-pressure hoses should never be used to rinse solar modules.
The proper thermostat for you depends on your heating and cooling equipment. All Solutions Heating & Cooling offers programmable and nonprogrammable thermostats that can help enhance the efficiency of your HVAC systems. View our available products or contact us at 971-414-2639 to learn more.
Heating and cooling can make up a significant amount of your utility bill. The innovative and high-efficiency heating and air conditioning products available from All Solutions Heating & Cooling can help decrease these costs. If you’re shopping for a new heating or cooling system, look for products with high SEER ratings for air conditioners and AFUE ratings for furnaces. SEER and AFUE are a measure of system efficiency, and the larger the number, the more efficient the product. Besides purchasing a new home comfort system, don’t forget about these additional factors:

      1. Is your system typically maintained? Whether it’s a furnace or air conditioner, HVAC systems will work more efficiently after regular maintenance checks.
      2. Could your home use a zoning system? If there are spaces in your home that are rarely used, a zoning system will allow you to heat or cool only the most used areas of your house.
      3. Does your home have a programmable or smart thermostat? According to the U.S. Department of Energy, programmable thermostats may decrease your heating costs by up to 35 percent, and your cooling costs by up to 25 percent.

Zoning systems give you the ability to section off areas of your residence and control the temperature differently in each room. These systems are ideal for when you have spaces of your house that are infrequently used or when you and your family are constantly in disagreement of how hot or cold it ought to be inside. Zoning systems are quiet and efficient, allowing you more control over the comfort of your family home. Learn more about the zoning systems available from All Solutions Heating & Cooling.